Hofi UV Glass Pro+ Google Pixel 6 Pro
Description
Tempered glass Hofi UV Glass Pro+ protects a significant part of the rounded screen, has a surface hardness of 9H, making it extremely resistant to scratches even when in contact with sharp objects, and in addition, it is covered with an oleophobic coating that reduces fingerprints.
The UV model is bonded using a liquid substance over the entire surface of the screen, and then the substance is cured with a UV lamp.
Thanks to this combination, we achieve an ideal effect of smoothness, clarity, and responsiveness.
Installation is easy and enjoyable for the user.
* We do not recommend using 3D glass without any case.
** We do not recommend using glass if the case overlaps too much on the edges of the screen, there is a risk of prying.
*** The functionality of the fingerprint reader on the screen may be slightly impaired if a film or glass coating is installed. The fingerprint reader is not fully optimized for additional coatings.
INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after a shower - the steam will absorb all the dust from the atmosphere and it won't interfere with your installation.
2) Thoroughly clean and degrease the surface of the screen, and then polish it to a shine with a dry cloth.
3) Use the tape from the set to cover the speaker.
4) Connect the UV lamp using the Type-C cable to a power source.
5) Pour the liquid onto the center of the device.
6) Install the glass as evenly as possible; you can also correct this step before curing the surface when the liquid is on the screen with the glass.
7) If an air bubble appears, use a bank card and gently push it out beyond the glass, this step should be done before curing.
8) Using the UV lamp, cure the glass along the center in five spots for 15 seconds each, and then around the edge for 10 seconds each.
9) Clean the phone from any residue of the cured glue.
10) If your device has a fingerprint reader on the screen, remember to remove and re-add your fingerprints after installing the glass on the screen.
11) Enjoy your well-done work!
PRODUCT FEATURES:
- 100% Original
- Packed in original packaging
- Tempered glass with a thickness of 0.3mm
- Scratch resistance 9H
- Equipped with an oleophobic coating
- Leaves no residue after removal
- Dimensions: 158x73mm
THE SET INCLUDES:
1 x Glass Hofi UV Glass Pro+
1 x UV Lamp (without Type-C cable)
1 x Tube of glue
1 x Installation kit
Description
Tempered glass Hofi UV Glass Pro+ protects a significant part of the rounded screen, has a surface hardness of 9H, making it extremely resistant to scratches even when in contact with sharp objects, and in addition, it is covered with an oleophobic coating that reduces fingerprints.
The UV model is bonded using a liquid substance over the entire surface of the screen, and then the substance is cured with a UV lamp.
Thanks to this combination, we achieve an ideal effect of smoothness, clarity, and responsiveness.
Installation is easy and enjoyable for the user.
* We do not recommend using 3D glass without any case.
** We do not recommend using glass if the case overlaps too much on the edges of the screen, there is a risk of prying.
*** The functionality of the fingerprint reader on the screen may be slightly impaired if a film or glass coating is installed. The fingerprint reader is not fully optimized for additional coatings.
INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after a shower - the steam will absorb all the dust from the atmosphere and it won't interfere with your installation.
2) Thoroughly clean and degrease the surface of the screen, and then polish it to a shine with a dry cloth.
3) Use the tape from the set to cover the speaker.
4) Connect the UV lamp using the Type-C cable to a power source.
5) Pour the liquid onto the center of the device.
6) Install the glass as evenly as possible; you can also correct this step before curing the surface when the liquid is on the screen with the glass.
7) If an air bubble appears, use a bank card and gently push it out beyond the glass, this step should be done before curing.
8) Using the UV lamp, cure the glass along the center in five spots for 15 seconds each, and then around the edge for 10 seconds each.
9) Clean the phone from any residue of the cured glue.
10) If your device has a fingerprint reader on the screen, remember to remove and re-add your fingerprints after installing the glass on the screen.
11) Enjoy your well-done work!
PRODUCT FEATURES:
- 100% Original
- Packed in original packaging
- Tempered glass with a thickness of 0.3mm
- Scratch resistance 9H
- Equipped with an oleophobic coating
- Leaves no residue after removal
- Dimensions: 158x73mm
THE SET INCLUDES:
1 x Glass Hofi UV Glass Pro+
1 x UV Lamp (without Type-C cable)
1 x Tube of glue
1 x Installation kit
Related products
Products you might be interested in
![Film Spigen Neo Flex Google Pixel 6 Pro [2 PACK]](/_next/image?url=https%3A%2F%2Fpresta-b2b.homescreen.pl%2Fimg%2Fp%2F1%2F9%2F4%2F2%2F6%2F8%2F194268-large_default.jpg&w=1200&q=90)
