Tech-Protect Glass Uv+ Xiaomi Redmi Note 15 Pro+ Plus 5G Clear [2 PACK]

Tech-Protect Glass UV+ It's tempered glass with a UV application. The technology of curing the adhesive with ultraviolet light ensures that the glass perfectly adheres to the screen while maintaining full transparency and touch sensitivity. In the set, you receive two pieces of glass and a UV lamp, so your device will be protected from day one.

The glass achieves a hardness of 9H on the Mohs scale, which means effective protection against keys, coins, and other items we carry in our pockets. With a thickness of 0.3 mm, it maintains the slim profile of your smartphone and does not affect the responsiveness of the touchscreen. The material absorbs impact energy, protecting the display from cracks even when dropped from a height. Thanks to UV technology, the glass also covers the curved edges of the screen, eliminating the formation of air bubbles.

The oleophobic coating reduces the visibility of fingerprints and makes it easier to clean the surface. The image remains crystal clear with faithful color reproduction, and the smooth surface of the glass maintains gesture precision and scrolling fluidity. After installation, remember to re-register your fingerprints so that the screen reader works optimally with the new protective layer.

* We do not recommend using 3D glass without any case.

** We do not recommend using glass if the case overlaps too much on the edges of the screen, there is a risk of it being pried off.

*** The functionality of the fingerprint reader in the screen may be slightly disrupted if a film or glass protector is installed. The fingerprint reader is not fully optimized for additional coverings.

• 100% Original
• Packed in the original packaging.
• Application with UV lamp
• Hardness of glass 9H
• Thickness of only 0.3 mm
• Oleophobic coating reducing fingerprints
• Full coverage of curved edges

2 × Tempered glass Tech-Protect Glass UV+

1 × UV Lamp

2 × Installation kit

1. Start the installation in the bathroom right after bathing - the steam will absorb all the dust from the atmosphere, and it won't interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, and then polish it to a shine with a dry cloth.
3. Use the tape from the set to cover the speaker.
4. Connect the UV lamp using a Type-C cable to a power source.
5. Pour the liquid in the center of the device.
6. Install the glass as evenly as you can; you can also adjust this stage before hardening the surface when the liquid is on the screen along with the glass.
7. If an air bubble has appeared, use a debit card and gently push it out of the glass area; this should be done before curing.
8. Using a UV lamp, cure the glass along the center in five spots for 15 seconds each, and then around the edge for 10 seconds.
9. Clean the phone of any residue from hardened glue.
10. If your device has a fingerprint reader on the screen, remember to remove and re-add your fingerprints after installing a screen protector.
11. Enjoy a job well done!